Waterworks
I.T.G. Innovative Technologies Group Ltd is the exclusive distributor of Raphael Valves Industries Ltd products on the territory of the Republic of Azerbaijan and Georgia.
Raphael Valves Industries Ltd, founded in 1949, part of Talis Group, is the first Israeli manufacturer of quality control valves. Since then, RAPHAEL is leading the Israeli and international market valve industry with its wide and innovative product range.
Located in a new modern facility, RAPHAEL's product range includes hydraulic control valves, butterfly valves, gate valves, check valves and other products.
Various coating technologies including epoxy, Rilsan (Nylon 11), enamel, give the ability to supply high quality protection for special applications.
RAPHAEL's R&D department constantly strives to introduce new and innovative products and solutions for water control systems including waterworks, sewage, irrigation, and industry specific. All products are subject ISO 9001..2008 quality control and pass strict pressure tests in the company's testing plant during manufacture and assembly.
Raphael's valves are designed to meet the requirements of water utility systems, wastewater or recycled water. From simple operated valve to a sophisticated water management system, Raphael automatic control valves perform with precision and accuracy to provide exact control of pressure, leakage prevention, flow, level, surge, pump control and more.
BTF
butterfly valve is intended to be used in water systems, as well as in chemical industries like a main or end pipe valve.By selecting suitable materials, the valve can handle a very large range of fluids, pressures and temperatures.
Gear/electric operated
Diameter: DN80 – DN1800
Working Pressure: PN16-PN64
Standard: DIN/ANSI
B3
valve is desinged for heavy duty industrial applications, for shut off and modulating service. Lever/gear/pneumatic /electric operatedWide face to face
Vulcanized seal
Diameter: DN80 – DN900
Working Pressure: PN16-PN25
Standard: DIN/ANSI
B7G
Utility and industrial applications, including HVAC, food and beverage, water distribution.The valve is desinged for on/off and moduating service. Can be hand, pneumatic or electrically operated. Lever/gear/pneumatic /electric operatedDiameter: DN50 – DN1600
Working Pressure: PN16
Standard: DIN/ANSI
BHF
butterfly valve is intended for use in various water systems as will as in chemical industries. By its special and unique construction, it is suitable for working pressure up to 25 barg. By proper selection of the materials of the seal and suitable valve parts, working temperatures can be up to 400C.Lever/gear/pneumatic /electric operated
Diameter: DN50 – DN1600
Working Pressure: PN16
Standard: DIN/ANSI
BJF
butterfly valve is intended for use in various water systems as will as in chemical industries.By its special and unique construction, it is suitable for working pressure up to 40 barg. By proper selection of the materials of the seal and suitable valve parts, working temperatures can be up to 400C.
Lever/gear/pneumatic /electric operated
Diameter: DN50 – DN1600
Working Pressure: PN16
Standard: DIN/ANSI
Application:
Drinking water, potable water, etc
Air conditioning or compressed air
Central heating
Industrial services
Irrigation and fire lines
Pressure or vacum
TRS / TRL are special types of soft sealing gate valves designed for waste water sewage and corrosive aplications
------------------------------------------------------
Soft Sealing NRS Flaged Gate ValveTR-AWWA
PN-16/240psi
DN-40/600
TR-AWWA meets or exceeds AWWA C-509/C-515
Face to Face: ANSI B16.1 / BS5163
Flange drilled to STd: ANSI B16.1 Class # 125/150
Op. Temperature:<80C
------------------------------------------------------
Soft SealingTRS / TRL General Description
* The spindle watertinghtness is achieved with two O-rings and a retainer.SCRIPTION
* The design permits the easy replacement of spindle seals.
* A spindle dustguard is also fitted.
* Spindle in 13% (standard) or 17% (optional) Cr. Stainless Steel, polisehd and threads formed by cold rolling.
* Wedge in ductile cast iron of 50 kg/mm2 (GGG-50) with central guides to avoid rubber friction when operating the valve. Internally and externally coated with NBR or EPDM (according to the customer's order).
* Wedge nut of forged copper alloy.
* Body-bonnet gasket inserted in sealing-groove.
* Plated sealed or stainless steel (DIN 912) retainig bolts.
* Flanges to EN1092-2:BSEN 1092-2 AS2129.
* Full and straight bore avoids turbulence, pressure loss and Venturi effect.
* All valves have foot support.
* Valves are supplied bare shaft with square cap or handwheel.
* Clockwise closing as standard. Counterclockwise can be supplied to special order.
* Anticorrosion coating:
- Rilsan (nylon 11) Blue inside and outside special dipping echnology applied (standard).
- Enamel internal and epoxy powder external, electrostatically applied.
- Special coatings on request
QUALITY CONTROL - ISO 9001, IQnet Raphael
Characteristics
* Each valve is tested for sealing test at working pressure.
* Each valve is tested hydrostatic (body) test at 150% of working pressure.
* Full flow.
* Full sealing in both directions.
* Maintenance free.
* Reduced operating torque
* ISO-DIN-UNE-NF, AWWA, JIS and SII.
* The valve is designed with minimum head-loss (no more a pipe of equal diameter and length).
* Suitable for horizontal and vertical installation
* Does not require any special service
Application
* Drinking water, potable water, etc
* Air conditioning or compressed air
* Central heating
* Industrial service
* Irrigation and fire lines
* Pressure or vacum
* TRS/TRL are special types of soft sealing gate valves design for waste water sewage and corrosive application.
Pressure and Temperature
* From 1 to +25 kg/cm2 (PN 6/10/16 and 25)
* From 10*C to +110*C
Options
The following can be provided under special order:
* Thicker paint, stoved enamel, ceramic, dielectric (200.000V), Teflon
* Counter clockwise closure
* Rubber for special applications
* Different colors (RAL) to identify different fluids
* Special construction materials on request
A wide range of Raphael Check Valves includes Swing, Ball and Tilting type valves for Water and waste water applications.
SW
Double Wing, Wafer Type
Diameter: DN50 – DN900
Working Pressure: PN16-PN40
Standard: DIN/ANSI/BSTD
Swing Rubber Check ValveS51
The valve is desinged for water and sewage applications.
Diameter: DN50
Working temperature: -10C to 100C
E51
The valve disc is kept in open position by the flow.The valve opening depends on the flow velocity.On interruption of the delivery, the valve closes, thus preventing a reflux of the medium. Due to is special and unique construction, it is suitable for working pressure up to 40 bars. Available sizes from 250mm for all working pressure and flow media, overall lenght as for flat type gate valves. Estandar: DIN, BS, ASA
Raphael's strainers have large straining area and enable particles to sink to the bottom of the strainer.High straining capacity and low headloss. Smooth stainless steel net with 3mm diameter holes. Nets with smaller holes can be added. Easy flushing of dirt accumulated at the bottom of the strainer.
V251
"Y" Pattern
Diameter: DN50 – DN300
Working Pressure: PN16
Standard: DIN/ASTD/ANSI
G251
Raphael's new RAF Water Meter is the new water meter that is suitable for industry and agriculture use.
The water meters have the advantage of:
* Huge flowing capacity
* Small resistance
* Negligible head loss
* High measureing accuracy
* Long life
RMP
RMV - Rotary Piston Water Meter RMV
FEATURES:
- Volumetric type
- Liquid sealed register
- Accuracy: acc. ISO4064 (2005) DN15-DN40 R160
- Maximum pressure and temperature: MAP 16, MAT 50
- Internal none return valve
- Optional pulse output via reed switch on request
RMM - Multi Jet Water Meter RMM
FEATURES:
- Dry type, magnetic coupling
- Accuracy: acc. ISO4064 (2005) DN15-DN40 R80, DN50 R50
- Maximum pressure and temperature: MAP 16, MAT 50
- Optional pulse output via reed switch on request
- Leak detector
RMS - Single Jet Water Meter RMS
FEATURES:
- Dry type, magnetic coupling
- Accuracy: acc. ISO4064 (2005) R80
- Maximum pressure and temperature: MAP 16, MAT 50
- Optional pulse output via reed switch on request
- Leak detector
RMW - Removable Measuring Unit Woltman Water Meter
FEATURES:
• Removable and interchangeable measuring unit – for maintenance purpose
• Dry type – magnetic coupling register
• Low head loss
• Accuracy: acc. ISO4064 (2005) R50
• Maximum pressure and temperature: MAP 16, MAT 50
• Installation: 5D upstream, 3D downstream required
• Optional pulse output via reed switch on request
• Lockable metal register cover and lid
• Flange drilling acc. ISO, BS, ANSI etc.
